Matco Tools FixAdvisor MD70 Operating Instruction page 52

Using the FixAdvisor
VIEWING OEM ENHANCED DTCs
4. When the last retrieved DTC has been displayed and the DTC/FF
button is pressed, the FixAdvisor returns to the Honda/Acura
Enhanced menu.
To view additional enhanced DTCs, repeat steps 1 through 4, above.
To exit the enhanced mode, press the SYSTEM MENU
button. The Scan Tool returns to the System Menu.
Toyota/Lexus OEM Enhanced DTCs
When OEM Enhanced is selected from the
System Menu (and the manufacturer selected
during the code retrieval procedure was
Toyota or Lexus), the Toyota/Lexus Enhanced
menu displays.
"ECM/PCM DTCs" or "Transmission DTCs."
Current DTCs, History DTCs or Pending
DTCs
Current
Readiness DTCs
1. Use the UP
the desired option, then press the ENTER
A "One moment please" message
displays, while the FixAdvisor retrieves
the selected DTCs.
If the FixAdvisor fails to link to the
vehicle's computer, a "Linking Failed"
message shows on the FixAdvisor's
Display.
- Verify the ignition is ON, then press
the POWER/LINK
continue.
2. To read the display:
Refer to DISPLAY FUNCTIONS on page 11 for a description
of LCD display elements.
A visible
FixAdvisor is being powered through
the vehicle's DLC connector.
The upper right hand corner of the
display shows the number of the code
currently being displayed, the total
number of codes retrieved.
The Diagnostic Trouble Code (DTC) and
related code definition are shown in the
lower section of the LCD display.
50
™
You may
DTCs, Historical
and DOWN
icon indicates that the
I/M MONITOR STATUS icons are not displayed when
viewing enhanced DTCs.
view either
DTCs or
buttons, as necessary, to highlight
button.
button to
MD70