Display Functions - Matco Tools FixAdvisor MD70 Operating Instruction

7. UP button - When in MENU mode, scrolls UP through the menu
and submenu selection options. When LINKED to a vehicle, scrolls
UP through the current display screen to display any additional data.
8. DOWN button - When in MENU mode, scrolls DOWN through
the menu and submenu selection options. When LINKED to a
vehicle, scrolls DOWN through the current display screen to display
any additional data.
9. ENTER button - When in MENU mode, confirms the selected
option or value.
10. GREEN LED - Indicates that all engine systems are running
normally (all Monitors on the vehicle are active and performing their
diagnostic testing, and no DTCs are present).
11. YELLOW LED - Indicates there is a possible problem. A "Pending"
DTC is present and/or some of the vehicle's emission monitors have
not run their diagnostic testing.
12. RED LED - Indicates there is a problem in one or more of the
vehicle's systems. The red LED is also used to show that DTC(s)
are present. DTCs are shown on the FixAdvisor's display. In this
case, the Malfunction Indicator ("Check Engine") lamp on the
vehicle's instrument panel will light steady on.
13. Display - Displays settings Menu and submenus, test results,
FixAdvisor functions and Monitor status information. See DISPLAY
FUNCTIONS, following, for more details.
14. CABLE - Connects the FixAdvisor to the vehicle's Data Link
Connector (DLC).

DISPLAY FUNCTIONS

See Figure 2 for the locations of items 1 through 16, following.
MD70
FixAdvisor
Figure 2. Display Functions
™
Controls
DISPLAY FUNCTIONS
11