Matco Tools FixAdvisor MD70 Operating Instruction page 78

Additional Tests
VEHICLE INFORMATION
4. When the retrieval process is completed, a
complete list of modules supported by the
vehicle under test is shown on the
FixAdvisor's display. Use the UP
DOWN
the entire list.
5. When you have finished viewing the list of
available modules, press the M button to
return to the "Vehicle Information Menu."
Viewing In-use Performance Tracking (IPT)
The FixAdvisor can retrieve In-use Performance Tracking (IPT) statistics
for monitors supported by the vehicle under test. Two values are
returned for each monitor; the number of times that all conditions
necessary for a specific monitor to detect a malfunction have been
encountered (XXXCOND), and the number of times that the vehicle has
been operated under the specific conditions for the monitor (XXXCOMP).
Statistics are also provided for the number of times the vehicle has been
operated in OBD monitoring conditions (OBDCOND), and the number of
times the vehicle's engine has been started (IGNCNTR).
1. While linked to the vehicle, press and
release the M button.
The "Main Menu" displays.
2. Use the UP
as necessary, to highlight Vehicle Infor-
mation, then press the ENTER
The "Vehicle Information Menu" dis-
plays.
3. Use the UP
as necessary, to highlight IPT, then press
the ENTER
If In-use Performance Tracking is not
supported by the vehicle under test, an
advisory
FixAdvisor's display. Press the M
button to exit.
4. When the retrieved process is completed, In-
use Performance Tracking statistics for
monitors supported by the vehicle under test
are shown on the FixAdvisor's display. Use
the UP
necessary, to view the entire list.
5. When you have finished viewing the
statistics, press the M button to return to
the "Vehicle Information Menu."
76
buttons, as necessary, to view
and DOWN
and DOWN
button.
message shows
and DOWN
and
buttons,
button.
buttons,
on the
buttons, as
MD70