Table of Contents
Advertisement
2, Basic Operation
POWER switch down until the
A higher squelch level requires a stronger signal to unmute the
indication disappears.
receiver.
The default setting is Level |.
@ Voltage Indication
The power supply voltage is indicated on the display.
1. Press the MONI (SQL) key. "SQL" will appear on the display.
It is possible to adjust the squelch level when SQL is indicated on
the display.
AX Caution: "OVER-V" flashes on the display, and the
transceiver makes a beep when the power supply
voltage is over 16.0V.
None of the functions work in this state because of
the overvoltage.
Wi Adjusting the Audio Volume
Rotate the Volume dial clockwise
to increase the audio volume, and
counter-clockwise to decrease it.
"SQL" appears
Z. Rotate the Dial while MONI (SQL) key is pressed down to set the
squeich level.
13
Advertisement
Table of Contents
