Channel Delete; Memory Banks Operation - Alinco DR-638 Instruction Manual

21
Press key to display
display.
31
Rotate the dial or press [UP/DOWN] keys to select a desired memory
channel number.
41
While displaying the
press key. MEN-IN appears on the
display. Two beep is heard and then MEN-IN dissapears, channel
copy completed. If icon disappears during operation, simply press
the key again to resume.

CHANNEL DELETE

11
In memory mode, select the desired channel by using the dial or
numerical keys.
21
Press key to display
on the display. A beep is heard and the memory channel frequency
disappears
31
T h e n r o t a t e t h e d i a l o r p r e s s
DOWN] keys to confirm, channel delete
completed. If icon dissapears during
operation, simply press the
again to resume.

MEMORY BANkS OPERATION

The transceiver has 6 groups "A-F" and one no edit group.
Normal memory: 1 to 200 (200ch)
Bank A: CH 201 to 300 (100ch)
Bank B: CH 301 to 400 (100ch)
Bank C: CH 401 to 500 (100ch)
Bank D: CH 501 to 600 (100ch)
and a memory channel number on the
and a number,
then press key. MENOUT appears
[ U P /
key
Basic Operations
Bank E: CH 601 to 700(100ch)
Bank F: CH 701 to 758 (58ch)
In memory mode, you can do the groups function according to the
following instruction, the groups number show in the position of channel
number. Normal memory: Show "- -".
11
Press key to display
mode.
21
Rotating the dial to choose the groups you
want.
31
key again to confirm, " " icon appears on the display,
Press the
then the radio goes to the group that you choose.
If there is not channel in your choose group, it will return to the
original channel.
41
Exit the groups mode: Press the
times continuously, " " icon disappears, the radio will back to the
channel mode.
then press key to enter the group
then press key in two
5
15