Step 3 - Turning On Your Monitor - Angelcare AC210 Owner's Manual

CAMERA
Pairing button

STEP 3 - TURNING ON YOUR MONITOR

Your Camera and Parent Unit come pre-paired, so you should see video within 3 - 4
seconds of turning ON the units. The Camera connection signal strength icon will appear in
the status bar.
1
8
01mf_Manuel_AC210_EN_UK_12680.indd 8
Front Side
Rear
1) Press and hold the Parent Unit ON/
OFF button for 2 seconds until LCD
2
ON
screen is turned ON. Angelcare's
OFF
logo will be shown for 1 second.
2) Slide the Camera ON/OFF switch to
the ON position.
3) The Parent Unit will display Video
mode screen.
Speaker
Microphone
Camera
Power ON/OFF indicator
Micro USB charging port
POWER ON/OFF
Magnet for tabletop stand
2017-08-09 11:48 AM