Step 4 - Testing And Getting To Know Your Monitor - Angelcare AC210 Owner's Manual

When Parent Unit is turned ON and Camera is OFF, Parent Unit will
display Out-of-Range icon.
If there is a lost connection between the 2 units after 15 seconds,
the Out-of-Range alarm will sound on the Parent Unit (refer to
Troubleshooting section):
• The Out-of-Range icon will appear on the screen. The Parent Unit will
INFO BAR IMPORTANT ICONS
Temperature icon: Indicates room temperature
Temperature Alarm icon: Indicates Temperature Alarm is active
Night View Mode icon: Indicates the Camera is in Night View Mode
Sound icon: Indicates that Sound function is active
Connection icon: Indicates the connection quality between the Parent Unit and the
Camera.
Good connection
Battery Level icon: Indicates battery level
Empty

STEP 4 - TESTING AND GETTING TO KNOW YOUR MONITOR

IMPORTANT
When in menu or sub-menu modes, sound transmission between the Parent Unit and the
Camera will be temporarily deactivated.
01mf_Manuel_AC210_EN_UK_12680.indd 9
emit 3 consecutive beeps every 3 seconds.
Poor connection
1/3 Full
The Angelcare monitor can be used with the pre-program factory
®
settings or you can also customize your settings to your preference.
Main menu on the LCD display shows the different operation settings.
Use the direction keys to change or check the different functions on
the Parent Unit.
Press the Menu/Select button to highlight selected icon in blue.
Press the Menu/Select button to change from blue to green to show
preferred setting is selected. Press the Zzz button to exit or go back
to main menu when in sub-menu.
Lost connection
2/3 Full Full
E
N
9
2017-08-09 11:48 AM