Angelcare AC403 Owner's Manual

Angelcare AC403 Owner's Manual

Angelcare ac403 movement & sound baby monitor
Hide thumbs Also See for AC403:

Advertisement

OWNER'S MANUAL
MOVEMENT & SOUND BABY MONITOR
Model AC403
IMPORTANT ADVICE FOR INITIAL SETUP
Movement Alarm
Your monitor comes with the movement alarm activated.
When switching on your monitor it will alarm, with or without
the Sensor Pad plugged in, if no movement is detected.
Deactivate the movement function to use the monitor without
the Sensor Pad.
Batteries
Insert the enclosed rechargeable batteries into the Parent
Unit. If inserted incorrectly the Parent Unit will not charge
when placed in the charging cradle. The battery icon will flash
briefly on the Parent Unit screen to indicate charging.
Cord Safety
Ensure the Nursery Unit is at least 1 metre away from your
baby's cot. The Sensor Pad cord must always be kept out of
reach of baby and secured using the cord cover kit provided.
Voice-activated Sound Transmission
Your monitor will transmit when it detects sound from
your baby or in their room. You can adjust the microphone
sensitivity to suit your needs.
PLEASE FOLLOW THE INSTRUCTIONS CAREFULLY FOR CORRECT SETUP
Please DO NOT return this product to the store. For assistance please
contact our helpline on 0845 009 1789 or email helpline@babyhelpline.co.uk
Mon – Fri 10am – 4pm, excluding bank holidays.
for your peace of mind

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AC403 and is the answer not in the manual?

Questions and answers

Liz Roche
March 11, 2025

Can I use the monitor without the sensory pad

1 comments:
Mr. Anderson
March 11, 2025

Yes, the Angelcare AC403 monitor can be used without the sensor pad. The user has the option to deactivate the sensor pad and use it as a sound monitor only.

This answer is automatically generated

Summary of Contents for Angelcare AC403

  • Page 1 OWNER’S MANUAL MOVEMENT & SOUND BABY MONITOR Model AC403 IMPORTANT ADVICE FOR INITIAL SETUP Movement Alarm Your monitor comes with the movement alarm activated. When switching on your monitor it will alarm, with or without the Sensor Pad plugged in, if no movement is detected.
  • Page 2: Battery Warning

    DO NOT short-circuit supply terminals. ONLY use the recommended This Angelcare Monitor is a Personal Care Product. Please DO NOT return this to the store batteries or equivalent (volts and size) 7. DO NOT use monitor near water (such where you purchased it from.
  • Page 3: Important Safety Instructions

    33 x 33 cm and 6 mm thick. Only use Sudden release of battery electrolyte may your Angelcare monitor in a stationary ® occur, causing burns or irritation to eyes sleeping environment such as a crib where or skin.
  • Page 4: Setup Requirements

    • Reorient or relocate the receiving 1 Sensor Pad (AC403) or 2 Sensor Pads 1 Parent Unit (AC403) or Nursery Unit 2 Parent Units (AC403-2PU (AC403-2PU-2SP) with pre-installed cord covers antenna.
  • Page 5: Charging The Parent Unit

    STEP 1 - CHARGING THE PARENT UNIT (15 HOURS) HOW TO CHARGE THE BATTERIES IN THE PARENT UNIT: Plug the AC into the Parent Unit and a working electrical outlet. Your Parent Unit can function with the batteries IMPORTANT at 1/2 capacity but it is recommended that they are fully charged before Never use regular unplugging from the AC Adaptor...
  • Page 6: Installing The Sensor Pad

    STEP 2 - INSTALLING THE SENSOR PAD 2.2 SELECT THE CRIB LEG YOU WILL BE USING TO SECURE THE CORD COVERS RECOMMENDED 1) Use the crib leg by the wall closest to Cord covers 1, 2, 3, 4: Position on floor the Nursery Unit (Fig 1).
  • Page 7: Setting Up The Nursery Unit

    STEP 3 - SETTING UP THE NURSERY UNIT 1) Remove the battery cover and insert 4 AAA Alkaline Batteries (not included). 6) Place the 6 cord cover approximately 8 cm from the edge of the mattress 2) Place the Nursery Unit at a minimum support.
  • Page 8: Turning On

    STEP 4 - TURNING ON YOUR MONITOR IMPORTANT ICONS Detection Mode Icons: SOUND TRANSMISSION (VOX) Indicates selected dectection mode: 1) Press the Parent Unit ON/OFF button for 2 seconds. Nursery Unit: Movement Only Appears when options are being 2) Slide ON the Nursery Unit Power set for the Nusery Unit ON/OFF button.
  • Page 9: Testing And Operating

    5.3 - CHANGING THE MOVEMENT AND SOUND MONITORING FUNCTIONS STEP 5 - TESTING AND GETTING TO KNOW YOUR MONITOR The Angelcare ® monitor can be used with the pre-program factory settings TO SET DETECTION MODE: or you can also customize your settings to your preference.
  • Page 10: Out-Of-Range Alarm

    TO ACTIVATE THIS FUNCTION: TO STOP THE ALARM 1) Press MENU button 2 times. The Out-of-Range Indicator will blinks. Shut the Nursery Place your hand Press Unit OFF back on the any key 2) Using the UP and DOWN Arrows, mattress.
  • Page 11 (see section 5.6). Raise volume Lower volume 5.8 - HOLD Allows you to put your Angelcare monitor on HOLD. 5.6 - TEMPORARY MUTE 1) Press and hold the Down Volume arrow for 2 seconds. Allows you to put your monitor The Hold Icon will appear on the screen.
  • Page 12 5.9 - TEMPERATURE TO USE YOUR MONITOR TO ACTIVATE THE TEMPERATURE ALARM: 1) Press the MENU button 5 times. The Angelcare monitor can be used with the pre-program factory settings ® or you can also customize your settings to your preference.
  • Page 13: Troubleshooting

    STEP 6 - ACTIVATING AND DEACTIVATING ADDITIONAL FUNCTIONS TROUBLESHOOTING The Angelcare monitor can be used with the pre-program factory settings ® TAKING CARE OF YOUR RECHARGEABLE BATTERIES or you can also customize your settings to your preference. • Ensure that you fully charge your batteries for 15 hours before their first use.
  • Page 14 Angelcare ® rechargeable, movement and sound monitor (model AC403) is free from any material and workmanship defects, for a period of one (1) year (rechargeable batteries not included) from the date NO SOUND IS BEING TRANSMITTED of the original purchase.
  • Page 15: Technical Specifications

    927 MHz frequency for North America/Ecuador/Oceania. Caution: To reduce the risk of electric shock, do not expose this product to rain Hereby, Angelcare Monitors Inc, declares or moisture. this baby monitor is in compliance with the Danger of explosion if batteries are essential requirements and other relevant provisions of Directive 1999/5/EC.
  • Page 17 This Angelcare Baby Monitor is a Personal Care Product. Please DO NOT return this to the store, but contact us initially for advice and assistance: Angelcare Helpline on 0845 009 1789 Website: www.angelcare.co.uk Email: helpline@babyhelpline.co.uk NOTE: Helpline is open Monday to Friday, 10am to 4pm, excluding bank holidays.

Table of Contents

Save PDF