Sip And Spa Product Overview; Introduction To Sips And Spas; Spa Interface Processors - Cisco ASR-1000-SIP10 Hardware Installation Manual

SIP and SPA Product Overview

This chapter provides an introduction to SPA interface processors (SIPs) and shared port adapters
(SPAs). It includes the following sections:
•
•
•
For software details for the specific SIPs and SPAs that are supported on the Cisco ASR 1000 Series
Aggregation Services Routers, refer to the companion publication, Cisco ASR 1000 Series Aggregation
Services Routers SIP and SPA Software Configuration Guide.

Introduction to SIPs and SPAs

Cisco ASR 1000 Series Aggregation Services Routers SIPs and SPAs are a carrier card and port adapter
architecture that increases modularity, flexibility, and density across Cisco routers for network
connectivity. This section describes the SIPs and SPAs and provides some guidelines for their use.

SPA Interface Processors

The following list describes some of the general characteristics of a SIP:
•
•
•
•
Fully populate all slots and subslots with blank filler plates or functional SPAs for maximum efficiency
Note
of the cooling system.
OL-14126-03
Introduction to SIPs and SPAs, page 1-1
SIP and SPA Compatibility, page 1-2
Modular Optics Compatibility, page 1-3
A SIP is a carrier card that inserts into a router slot like a line card. It provides no network
connectivity on its own.
A SIP contains one or more subslots, which are used to house one or more SPAs. The SPA provides
interface ports for network connectivity.
During normal operation, the SIP should reside in the router fully populated either with functional
SPAs in all subslots, or with a blank filler plate (SPA-BLANK=) inserted in all empty subslots.
SIPs support online insertion and removal (OIR) with SPAs inserted in their subslots. SPAs also
support OIR and can be inserted or removed independently from the SIP.
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
1
C H A P T E R
1-1