Maintenance; Support - Axis 0810-004 User Manual

AXIS M1065-LW Network Camera
About system options
To stop writing to the share and protect recordings from being removed, select Lock under General Settings.

Maintenance

The Axis product provides several maintenance functions. These are available under System Options > Maintenance.
Click Restart to perform a correct restart if the Axis product is not behaving as expected. This will not affect any of the current
settings.
Note
A restart clears all entries in the Server Report.
Click Restore to reset most settings to the factory default values. The following settings are not affected:
• the boot protocol (DHCP or static)
• the static IP address
• the default router
• the subnet mask
• the system time
• the IEEE 802.1X settings
• the wireless settings
Note
If the Axis product is restored, uploaded applications and their settings are removed.
Click Default to reset all settings, including the IP address, to the factory default values. This button should be used with caution. The
Axis product can also be reset to factory default using the control button, see How to reset to factory default settings on page 63.
To identify the product or test the Status LED, click Flash LED under Identify and specify the duration in seconds, minutes or hours.
This can be useful for identifying the product among other products installed in the same location.
For information about firmware upgrade, see How to upgrade the firmware on page 65.

Support

Support Overview
The System Options > Support > Support Overview page provides information on troubleshooting and contact information,
should you require technical assistance.
See also Troubleshooting on page 65.
System Overview
To get an overview of the Axis product's status and settings, go to System Options > Support > System Overview. Information
that can be found here includes firmware version, IP address, network and security settings, event settings, image settings
and recent log items.
Logs & Reports
The System Options > Support > Logs & Reports page generates logs and reports useful for system analysis and troubleshooting. If
contacting Axis Support, please provide a server report with your query.
62