Menu Overview - Sirona DAC Universal Operating Instructions Manual

5 Operation
5.2 Using the menu and display information
Menu level 1 Menu level 2
"Program" "Ready 134 °C"
"Ready 134 °C
18min"
"Manual" "Open"
"Close"
"Water"
"AutoDrain"
"Draincham"
"Flow test"
"Settings" "Printer"
"Settings" "Oil expel"
"Settings" "Language"
60
5.2.2.2

Menu overview

Menu level 3 Result / Activity / Note
Program: 134 °C / 273 °F, Sterilization time 3 min.
Program: 134 °C / 273 °F, Sterilization time 18 min.
Opens the lid.
Closes the lid.
The lid must be in place.
Pumps water into the chamber.
Empties the water tank through the "Drain" connection via the
chamber.
An empty lid must be inserted into the autoclave.
If automatic water supply is activated, it must be deactivated.
Empties the chamber through the "Drain" connection.
An empty lid must be inserted into the autoclave.
The lid is raised approx. 60 seconds after starting this function
and pressing the "Menu/Enter"-Key.
The chamber should then be empty. If not, the operation can
be repeated.
Measurement of inlet air flow.
"ON " "OFF"
/ Switches the printer function on or off.
"Printout
Selects the language of the print. The available printout
language"
languages are English, German and French.
"Reprint"
The last print is printed again.
1 - 5 oil expel Condensation and excess oil are purged from the instruments
with air.
Standard setting: Level 1.
The maximum is level 5.
Please note that oil is purged before sterilization and that
increasing oil purging prolongs the total cycle time.
Please observe the manufacturer's instructions for use for
each instrument.
UK English is selected as display language.
D German is selected as display language.
F French is selected as display language.
SP Spanish is selected as display language.
I Italian is selected as display language.
S Swedish is selected as display language.
Sirona Dental A/S
Operating Instructions DAC Universal
66 15 764 D3472
D3472.201.21.01.02 05.2017