Led Indicators - Digi CM 32 User Manual

LED Indicators

Use the LED indicators to confirm your attachment to the network and that the
Digi CM is able to send and receive data.
System
Ethernet
Serial port
Chapter 13
LED
Power On when power is supplied
Ready On when system is ready to run
PC On when a PC device is running
100Mbps On when 100Base-TX connection is detected
LINK On when connected to an Ethernet network
Act Blinks whenever there is any activity through the
DIGI CM Ethernet port
In use On when the serial port is ready to run
Rx/Tx Blinks whenever there is any incoming or outgoing
traffic through the serial port of the Digi CM
Hardware Information
Function
81