Managing the SNMP Protocol
Managing the SNMP Protocol
The Digi CM SNMP protocol can be managed using an NMS or SNMP
browser. However, before the NMS or SNMP browser can access the data, the
Access control settings must list the IP address of the host from which the
browser is executed. See the preceding graphic for details.
Using the Configuration Menu
Configuring SNMP
To configure SNMP from the configuration menu, do the following:
1. Access the configuration menu.
2. Choose Network configuration > SNMP configuration.
3. Enter the desired parameters for the menu items.
4. Use the ESC key when all parameters are entered to return to the main
5. Choose Save changes.
42
menu.
Chapter 6