Port Access Menu - Digi CM 32 User Manual

Port Access Menu

Port Access Menu
Another default menu is the Port Access Menu. This menu is available to all
users. Access to this menu can be established through a Telnet or SSH
session, the web interface by selecting Serial ports > Connection > Port
access menu connection.
Users access this menu through a Telnet or SSH session using the IP address
of the Digi CM followed by the port number 7000. An example is:
telnet 192.168.100.200 7000
By default root is connected to the command line interface and the preceding
option allows the root user access to the port access menu.
58
Chapter 8