Energy Consumption - Danfoss ECL 2000 User Manual

10.4.10 Energy Consumption

Sensor input
LON input
When energy consumption is being measured by a sensor connected to one of the sen-
sor inputs S8, S9, S10 or S11), the following picture displays the energy consumption
and allows you to reset the measurement:
Display text Parameter
Accumulated
Accum.
Energy
Reset
When energy consumption is being measured by a device connected to the ECL 2000
via LON, the following picture displays the measured energy consumption:
Display text Parameter
Accum. Accumulated
Energy
Note:
When energy consumption is being measured by a device connected via LON, the ac-
cumulated consumption cannot be reset. This is due to the fact that the accumulated
energy consumption is calculated by the device and transmitted to the ECL 2000.
EY.65.H4.02
Default value, Description
range
Range: The accumulated energy consumption
0-9999 MWh
or
0-9999 GWh
Range: The currently measured energy con-
0-999 kW or sumption. This parameter is read-only
0-999 MW and cannot be modified
Select this parameter and press
reset the accumulated energy consump-
tion to 0. A new calculation of the accu-
mulated value is started
Default value, Description
range
Range: Read-only parameter. The accumulated
0-9999 MWh energy consumption
or
0-9999 GWh
Range: Read-only parameter. The currently
0-999 kW or measured energy consumption
0-999 MW
Service Settings
to
73