Leica Led5000 Mci: Alternative Assembly - Leica M125 C User Manual

Leica LED5000 MCI: Alternative Assembly

Under certain circumstances, the light source
must not be moved along with the optics
carrier. A typical example is multifocus images
in which the Z-stack changes while the angle
of incidence of the light must remain the same.
For such purposes, the Leica LED5000 MCI is
directly fastened to the column.
Installation on the column
1. Pull the retaining stirrup out of the Leica
LED5000 MCI.
Leica M Series User Manual
2. Screw the retaining stirrup into the column
at the notch using the single screw. If you
tighten the screw, the retaining stirrup is
automatically moved into the correct posi-
tion.
Assembly
3. Push the Leica LED5000 MCI onto the
retaining stirrup.
44