Leica Tl Rc / Leica Tl Rci - Leica M125 C User Manual

Leica TL RC / Leica TL RCI

The base is delivered with the adapter plate
installed. The selected stage (IsoPro cross-stage
or standard stage 10 450 562), and the focusing
drive will have to be mounted later.
Ensure that the instruments are unpacked on a
level, adequately sized, and nonskid underlay.
Stage assembly
The transmitted-light base TL RC/ RCI can be
equipped with three different stages. The
selected stage is mounted on the base before
commissioning. You can switch between the
stages at any time with just a few hand move-
ments.
The following paragraph assumes use of the
base without the stage mounted. Disassembly
is performed in reverse order of the following
steps.
Leica M Series User Manual
Standard stage
1. Take the glass plate from the rectangular
gap in the standard stage.
2. Position the stage on the transmitted-light
base in such way that the four holes align
over those in the base.
3. Attach the stage to the base using the four
Allen screws provided.
4. Insert the glass plate back into the standard
stage.
Assembly 32