Transmitted-Light Base Leica Tl Bfdf - Leica M125 C User Manual

Transmitted-light Base Leica TL BFDF

Standard delivery
The base is delivered with the adapter plate
installed. The selected stage (IsoPro cross-stage
or standard stage 10 450 562), and the focusing
drive will have to be mounted later.
Stage assembly
The TL BFDF transmitted-light base can be
equipped with three different stages.
Leica IsoPro manual cross-stage
Leica IsoPro automatic cross-stage
Standard stage 10 450 562
Leica M Series User Manual
The selected stage is mounted on the base
before commissioning. You can switch between
the stages at any time with just a few hand
movements.
The following paragraph assumes use of the
base without the stage mounted. Disassembly
is performed in reverse order of the following
steps.
Assembly
Standard stage
1. Take the glass plate from the rectangular
gap in the standard stage.
2. Position the stage on the transmitted-light
base in such way that the four holes align
over those in the base.
3. Attach the stage to the base using the four
Allen screws provided.
4. Insert the glass plate back into the standard
stage.
31