Leica Led5000 Rl: Use - Leica M125 C User Manual

Leica LED5000 RL: Use

The light of the Leica LED5000 RL can
be very bright. Therefore, always switch
on the illuminator before you look through the
eyepieces! Avoid looking directly into the LEDs.
Switching on the focus column
1. Switch on the focus column using the
power switch on the rear in order to supply
the Leica LED5000 RL with current.
Leica M Series User Manual
Using the front keypad
Use the key to switch the illuminator on
or off.
Use the or keys to adjust the bright-
ness in 10 increments.
Tap the or key briefly to adjust the
intensity in small increments. Hold one
of the keys to change the intensity more
quickly.
Assembly
Using the side keypad
Use the and keys to toggle between
the illuminator segments.
Use the key to toggle between the
following illuminator segments: full ring,
half ring (left–right), half ring (front–rear),
quarter ring, opposite quarter rings, eighth
ring.
Use the and keys to rotate the active
segments clockwise or counterclockwise.
48