In Case Of Rx Bit Errors - Xilinx KC724 IBERT Getting Started Manual

X-Ref Target - Figure 1-15

In Case of RX Bit Errors

If the RX Bit Error Count for any transceiver displays a non-zero value, or to simply reset
the counter, click the respective BERT Reset button
X-Ref Target - Figure 1-16
Figure 1-16: Click BERT Reset Button to Zero a Non-Zero RX Error Count
If the MGT Link Status shows No Link for one or more transceivers click the respective TX
Reset button followed by BERT Reset
KC724 IBERT Getting Started Guide
UG930 (v1.0) October 23, 2012
Figure 1-15: GTX IBERT Console
www.xilinx.com
Running the GTX IBERT Demonstration
(Figure 1-16) to zero the count.
ug930_c1_16_101512
(Figure 1-17).
ug930_c1_15_061412
17