8.7
Changing the sealing cone
Disassembly
1.
Remove the fluid needle (
2.
Pull and hold the pull lever.
Fig. 15: Dismantling the sealing cone
3.
Remove the spring ( Fig. 15/4).
4.
Pull out sealing bushing ( Fig. 15/3) and sealing cone ( Fig. 15/2) using the dismantling tool.
5.
Take out sealing ( Fig. 15/1) and check for wear, replace if necessary.
GB–36
Operating instructions
Ä Chapter 8.5 'Changing the fluid needle' on page 30).
T-Dok-198-GB-Rev.3
mail@krautzberger.com, www.krautzberger.com