Customer Care - Krautzberger 200-0138 Operating Instructions Manual

Hand-held Spray Gun Mignon 3
Spray pattern Error
Spray pattern too thin
Fluid jet comes out in
spurts or rapid bursts
Leakage on the
clamping screw
Fluid nozzle drips
9.1

Customer Care

Krautzberger GmbH
Customer service
Stockbornstr. 13
65343 Eltville am Rhein
+49 6123 - 698151
customercare@krautzberger.com
200-0137 ￭ 200-0138 ￭ 200-0187 ￭ 090-3566 ￭ 200-0155 ￭ 200-0156
Cause
Cap nut loose
n
Insufficient mate-
n
rial supply
Blocked fluid path
n
Loose or dam-
n
aged fluid nozzle
n Worn needle seal
n Needle seal
defective
n Worn or damaged
fluid needle
n Dirty or damaged
fluid nozzle
ENGLISH
Remedy
Tighten cap nut
n
Increase material
n
supply
Clean
n
Tighten or replace (
n
Ä Chapter 8.6
'Changing the material
nozzle and the air
nozzle' on page 34).
n Replace needle seal
n Replace needle seal
n Change fluid needle (
Ä Chapter 8.5
'Changing the fluid
needle' on page 30).
Ä Chapter 8.4
n Clean (
'Cleaning the hand-held
spray gun' on page 27)
Ä Chapter
or replace (
8.6 'Changing the
material nozzle and the
air nozzle' on page 34)
fluid nozzle.
GB–51