Keithley 2260B-30-72 User Manual page 84

Steps
Note
Test Sequence Error Messages
Overview
Error #
-1
-2
-3
-4
-5
-6
-7
1. Select T-04 (Test Sequence
Remove) and choose which test
sequence to remove from the
internal memory.
T-04 range 1~10
2. The test sequence will be removed from the
internal memory slot.
Error messages: If you try to remove a test
sequence from an empty memory location "Err
003" will be displayed on the display.
The following error code numbers may appear
on the display when trying to run a test
sequence. Use the error code numbers
determine the cause of the error.
For example: If Error # -52 appears on the
display, it indicates that one of the Time(sec)
fields is over range for the test sequence.
Details
_SEQ_ERR__FILE_NOT_FOUND
_SEQ_ERR__FILE_IS_TOO_LARGE
_SEQ_ERR__ALLOCATE_MEMORY_ERROR
_SEQ_ERR__OPEN_THE_FILE_ERROR
_SEQ_ERR__READ_DATA_ERROR
_SEQ_ERR__USING
_SEQ_ERR__FORMAT_ERROR
OPERATION
Page 76
81