Keithley 2260B-30-72 User Manual page 47

Steps
OVP Level
OCP Level
Power switch trip
44
Before setting the OVP or OCP level:
Ensure the load is not connected.

Ensure the output is set to off.

1. Press the OVP/OCP key. The
OVP/OCP key lights up.
2. The OVP setting will be displayed on the top
and the OCP setting (or OFF) will be displayed
on the bottom.
3. Use the Voltage knob to set the
OVP level.
10%~110% of rated
Range
output voltage.
4. Use the Current knob to set the
OCP level.
10%~110% of rated
Range
output current, OFF.
5. Press OVP/OCP again to exit. The
OVP/OCP indicator will turn off.
Set F-95 (Power switch trip) to 1 (to
disable the power switch trip) or to
0 (to enable the power switch trip)
and save.
1 (Disable) or 0 (Enable)
F-95
2260B Series User Manual
OVP Setting
V
OCP Setting
A
Voltage
Current
Page 96