Connection
without sense
wiring
Connection with
sense wiring
5. Choose a suitable crimp for the terminals.
6. If using voltage sense, remove the
sense terminal joining plates and
connect sensing wires to the
load(s).
7. Connect the positive load cable to the positive
output terminal and the negative cable to the
negative output terminal.
8. Reattach the output terminal
cover.
Using M4 screws
Negative
potential
Positive
potential
Using M4 screws
Sense +
Using M8 bolts
Negative
potential
Positive
potential
Using M8 bolts
Sense -
Sense +
OPERATION
Page 53
Page 36
Sense -
35