Keithley 2260B-30-72 User Manual page 19

Analog Control
Connector
Output Terminals
USB B port
Fans
Ethernet Port
16
Standard 26 pin MIL connector
(OMRON XG4 IDC plug).
The analog control connector is
used to monitor current and voltage
output, machine status (OVP, OCP,
OTP etc.), and for analog control of
the current and voltage output.
Use an OMRON XG5 IDC socket as
the mating socket.
Positive (+) and negative (-) output
terminals.
Chassis ground
Sense (-) and Sense (+) terminals.
The USB B port is used for remote
control.
Temperature controlled fans
The Ethernet port is used for remote
LAN
control and digital monitoring from
a PC.
2260B Series User Manual