Keithley 2260B-30-72 User Manual page 62

Output Voltage/
Output Current
Slew Rate
Only the master unit's current or voltage

slew rate settings apply.
The settable current slew rate is double or

triple that of a single unit, depending on the
number of units that are used in parallel.
For example:
The 2260B-30-36 has a maximum settable
current slew rate of 72A/S. When two 2260-
30-36 units are used in parallel, the
maximum settable slew rate setting is
144A/S.
Internal Resistance
Only the master unit's internal resistance

settings apply.
For 2 units in parallel, the internal resistance

is actually half of the setting value.
For 3 units in parallel, the internal resistance

is actually a third of the setting value.
Bleeder Control
The master unit is used to control the bleeder

settings. The bleeder resistors in all the slave
units are always turned off when in parallel
mode.
Model
2260B-30-36
2260B-80-13
2260B-30-72
2260B-80-27
Single unit 2 units
30V 30V
36A 72A
80V 80V
13.5A 27A
30V 30V
72A 144A
80V 80V
27A 54A
OPERATION
3 units
30V
108A
80V
40.5A
30V
216A
80V
81A
59