Table 070-5: Service Mode - Miele CVA 4062 Technical Information

CVA 4062/CVA 4066/CVA 4068 Coffee Systems
Service Function Option
Sensor Test
Operating Hours

Table 070-5: Service Mode

0
S51/4 (Grind Amount
Compensation
Microswitch)
1
S60/1, S60/2 (Brew Move the brew unit into the appropriate position using the
Unit Position component test and compare to the switch reading on the
Switches) display (see Table 070-6).
0
S60/3 (Ceramic Valve
Position Switch)
1
0
S87/1 (Drip Tray
Presence Switch)
1
0
S87/2 (Brew Unit
Presence Switch)
1
S87/4 (Waste
0
Container Presence
Switch)
1
0
S87/5 (Ground Coffee
Funnel Presence
1
Switch)
0
S87/6 (Dispenser
Presence Switch)
1
Total
1R1
2R1
Espresso
Coffee
Cappuccino
Portions Latte Macchiato
Hot milk
Milk froth
Hot water
No. of descaling prog.
Clean milk pipework
No. of cleaning prog.
Clean brew unit
99
Technical Information
Description
The grind amount compensation
switch is open.
The grind amount compensation
switch is closed.
The ceramic valve position switch
is open.
The ceramic valve position switch
is closed.
The drip tray is not inserted.
The drip tray is inserted.
The brew unit is not inserted or is
inserted but not locked in place.
The brew unit is inserted and
locked in place.
The waste container is not
inserted.
The waste container is inserted.
The ground coffee funnel is open.
The ground coffee funnel is
closed.
The dispenser is missing or was
not pushed in to the switching
point.
The dispenser is correctly
inserted.
Total operating hours are shown.
Operating hours (pure heating
time) of the steam heater are
shown.
Operating hours (pure heating
time) of the coffee/hot water
heater are shown.
The number of servings is
displayed.
The number of descales is
displayed.
The number of cleanings is
displayed.