Operating and Installation Instructions Coffee System CVA 4062 CVA 4068 en - US, CA To prevent accidents and appliance damage read these instructions before installation or use. M.-Nr. 07 816 880...
IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances basic safety precautions should always be followed, including the following: Read all instructions before installation or use of the coffee system. Please read these instructions carefully to prevent accidents and machine damage. This appliance complies with current safety requirements.
Otherwise the warranty is void. Defective components should be replaced by Miele original spare parts only. Only with these parts can the manufacturer guarantee the safety of the appliance. To protect against fire, electric...
Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner. Contact Miele. Always attach the cord to the appliance first, then plug it into the wall outlet. To disconnect, turn the machine off, then remove the plug from the wall outlet.
Only use the descaling tablets provided by Miele. Take care to use the correct mixture of water and descaler, otherwise it may cause damage. Depending on the oil content of the coffee, the brew unit may clog.
Guide to the coffee system Front view On/Off s touch control Display Left arrow <, to scroll through program options OK touch control, to confirm selected program options and save settings Right arrow >, to scroll through program options Hot water - touch control Door grip Hot water dispenser Lighting...
Guide to the coffee system Interior view Main switch Storage drawer Funnel for ground coffee Grind control slide Coffee bean container Drip tray with no-spill grid for transport Water tank Brew unit Waste unit Main dispenser connector (connects the brew unit to the main dispenser) Stainless-steel milk container Main dispenser connector cap...
To measure ground coffee Cleaning agent For daily cleaning of the milk pipework Cleaning tablets To clean the brew unit Descaling tablets To descale the coffee system Additional accessories are available. Contact Miele or visit the Miele website for more information...
Touch controls Select a touch control with your fingertip to use the machine. Display Espresso The following symbols appear in the main menu display: Espresso Coffee Cappuccino Latte macchiato Hot milk Milk froth User profile for up to nine different users Maintenance programs Settings: to customize your coffee system...
First steps to use You will then be prompted to set the Time format. ^ Tap < or > until the time format you wish to select (12-hour or 24-hour) is highlighted, confirm with OK. ^ Enter the Time of day: First set the hours using <...
Before using the coffee system for the first time, clean the appliance. See "Cleaning and Care". Be sure to program the water hardness (see "Settings - Water hardness"). Filling the water tank The beans and the water quality is important for a good espresso or coffee.
Filling water, beans or ground coffee Filling the bean container Only fill espresso or coffee beans in the beans container. Anything else - including ground coffee - will damage the grinding unit. Caramelized or otherwise pre-treated beans or sugar containing beverages must not be filled into the appliance.
Clean the coffee system daily to prevent bacterial growth. All parts of the coffee system are dishwasher-safe except for the brew unit, bean container, stainless-steel milk container and lid, and main dispenser cover. Failure to properly maintain machine may cause health issues.
Preparing drinks Adjusting main dispenser height The height of the main dispenser can be adjusted, to keep the shortest distance to the cup and retain heat, and maintain a better crema and froth. ^ Slowly pull the main dispenser up or down as desired.
Double portion If you would like a double portion of coffee or espresso, or to prepare two portions at the same time, ^ tap the OK button a second time, while the display reads "2 portions?". The two portions are always prepared one after the other.
Preparing drinks Prepare beverages ^ Place a cup under the main spout. ^ Tap the OK button. The appliance brews the espresso or coffee, and the selected beverage is dispensed from the main spout. Do not open the appliance door during the brewing process.
To prepare beverages with milk, ^ place the lid on the stainless steel milk container and turn the lid to the left, so that it clicks into place. ^ Open the appliance door and hang the milk container in the appliance (as shown).
Preparing drinks User profile beverages The user profile function is used to prepare beverages to suit your taste, by adjusting the amounts of water, milk, and ground coffee, as well as temperature and pre-brewing (see "Creating a user profile"). If you have already created a user profile, first select it then prepare the beverage.
The finer the coffee beans are ground determines the strength of the coffee and the quality of the crema. To prevent machine damage adjust the coffee grinder one level at a time and let the beans grind before adjusting another notch. Otherwise the machine will be damaged.
Settings The coffee system can be customized to suit individual preferences. Settings menu Settings ^ Tap < or > until Settings highlighted. Confirm with OK. ^ Tap < or > until the desired option is highlighted and confirm with OK. The current setting(s) will be marked with a check.
Time of day ^ Select "Settings ", confirm with OK. Settings Time of day Timer ^ Tap < or > until "Time of day" is highlighted, confirm with OK. Three options are now available: Display The time display can be turned on or off.
Settings Timer ^ Select "Settings ", confirm with OK Settings Timer Coffee jug ^ Select < or > until "Timer" is highlighted, confirm with OK. ^ Use < or > to select "Set", confirm with OK. Three options are now available: Switch on at You can program your machine to turn on automatically at a certain time, for...
Settings Amount of coffee The amount of coffee will determine both the strength and the crema of your brewed coffee. Depending on the type of coffee, the ideal amount ranges from approximately 0.2 ounces and 0.5 ounces (6 g to 14 g) per cup. The higher the value, the stronger the prepared espresso, coffee, latte macchiato, or cappuccino will be.
Temperature Five temperature settings are available for each coffee beverage and three settings for hot water. Not every coffee type allows high temperatures. Some types react so sensitively that the crema cannot be properly built. ^ Select "Settings ", and confirm with Settings Temperature Automatic rinsing...
Settings Steam system This appliance has two heating systems, making it possible for you to prepare milk froth/hot milk and coffee/espresso, one right after the other. If you seldom need milk froth or hot milk, you can turn the steam heating system off to save energy.
Lighting: Setting the switch-off time Whenever the machine is On, the machine lighting is also On. The lighting turns off automatically when the machine has been idle for 15 minutes. When the machine is turned off, you can program the lighting to remain On and to then shut off automatically after a certain amount of time if the machine is not used...
Settings System lock The coffee system can be locked so that it cannot be used by children or those not familiar with the operating instructions. When the machine is locked, the timer setting "Switch on at" will not work. Activating/Deactivating the System lock ^ Select "Settings ", confirm with OK.
Settings Tone options A tone can be selected to confirm the selection of a touch control. The volume of the tone can also be adjusted. ^ Select "Settings ", confirm with OK. Settings Volume Showroom prog. ^ Tap < or > until "Volume" is highlighted, confirm with OK.
Restoring factory default settings The "Factory default" setting can be used to reset different settings back to their original default status. You can select whether to reset all settings to the factory default or delete any user profiles. ^ Select "Settings ", confirm with OK.
Setting the serving sizes The flavor of a coffee beverage depends not only on the type of coffee, but also on the quantity of water used. Not every espresso or cappuccino cup is the same size. Use this feature to set the volume of water to suit your taste and cup sizes.
Setting serving sizes for cappuccino and latte macchiato using OK ^ Place the cappuccino cup or latte macchiato glass you will be using to set the portion size under the main dispensers. ^ Select cappuccino or latte macchiato. ^ Press and hold OK until the display shows the options for Cappuccino (Milk froth, Espresso) or Latte Macchiato (Hot milk, Milk froth,...
Setting the serving sizes Setting the serving size for hot water ^ Place the desired cup under the hot water dispenser. ^ Tap - until the display reads "Prog. the amount". ^ Tap - again once the cup is filled as desired and "Save"...
If the appliance is used by several people with different preferences, you can save up to 9 individual user profiles. The following settings can be programmed for each user profile: – Serving size for coffee beverages and hot water – Serving size of milk for beverages with milk –...
User profiles Creating a user profile ^ Tap < or > until "Create" is highlighted, confirm with OK. Up to 9 user profiles can be created. If you try to create more than 9 user profiles, the message "Memory full" will appear, you will need to delete a profile to create space.
Deleting a user profile ^ Select "Delete user profile", confirm with OK. ^ Use < or > to select the user profile you wish to delete, confirm with OK. A check mark appears after the user profile, and it will be erased shortly. User profiles Revert The appliance can be set so that it...
Cleaning and care Quick Guide The coffee machine must be cleaned regularly to prevent bacteria. Recommended frequency Every time mile is prepared, if there is more than one hour between uses Everyday (at least at the end of the day, before you switch off the appliance) Once a week...
Allow the coffee system to cool before cleaning. Danger of burns! Do not clean the unit with a steam cleaner. Never use cleaners containing chlorides, sand, soda or scouring agents. These will damage the surface. To avoid mold, growth and odors it is important to clean the machine regularly.
Cleaning and care Milk pipework Rinsing the milk pipework To prevent the milk residue from spoiling or drying in the machine and pipework, you should rinse these lines after use. In addition to rinsing after use, the lines need to be cleaned at the end of the day.
Hang the cleaning container in the appliance where the milk container would normally sit. Use only Miele cleaning agent, which was developed especially for this coffee system. You can obtain this cleaning agent from Miele. The cleaning process has now begun.
Cleaning and care ^ Remove the cover with the milk pipework. Clean the whole part in the dishwasher without taking it apart. If there are milk residues in the milk pipework you can clean them with the cleaning brush provided. To do this, take the cover and the milk pipework apart as follows: Do not pull the milk hoses off the...
^ Then press the milk hoses into the guide rail and push the dispenser retainer on until it clicks into place. ^ Put the cover with the milk pipework back into the rear of the appliance door. ^ Reattach the main dispenser (see "Main dispenser").
Cleaning and care Main dispenser ^ Pull the main dispenser all the way down and pull the cover forward to remove ^ Turn the cover around, slide the insert upward and out, and clean both parts thoroughly. ^ Slide the insert back into the cover until it clicks into place.
Water tank Empty the water tank daily and refill before preparing the first drink with fresh, cold tap water. Check if the valve is clean. If the valve has residues on it, the water tank will not connect properly and might leak.
Cleaning and care Drip tray The trip tray contains a sensor which causes the display to show when the tray is full and needs to be emptied. Clean the drip tray daily. Remove the drip tray after the final rinse when no more water runs from the lines.
Bean container The bean container must be cleaned by hand with hot water and liquid dish soap. Do not use a dishwasher. ^ Pull the bean container out and push the lid back. ^ Wash the bean container by hand with hot water and liquid dish soap, then dry with a soft cloth.
Cleaning and care Brew unit Manually clean the brew unit weekly. The movable parts are lubricated and the cap will get damaged in the dishwasher. Do not use a dishwasher this will cause damage. ^ Take out the water tank, waste unit and the storage drawer.
They are specially developed for the coffee maker to optimize the degreasing. The cleaning tablets can be purchased from Miele. As a reminder the display shows "Please run cleaning program" after 200 cups and then until the machine is cleaned.
Cleaning and care When the display prompts you to Please drop the cleaning tablet in the ground coffee funnel. ^ Remove the storage drawer and open the funnel lid. ^ Drop a cleaning tablet into the funnel. ^ Close the lid, replace the cover, and close the machine door.
They are specially developed for the coffee system to optimize the descaling. The descaling tablets can be purchased from Miele. Other agents may damage the machine and affect the taste of coffee and hot water. The machine could also be damaged.
Descaling the appliance Descaling Maintenance ^ Tap < or > until "Maintenance m" is highlighted, confirm with OK. ^ Select "Descale" confirm with OK or, if the appliance is switched off: tap OK while switched off. ^ Select "Start", tap OK to begin the descaling process.
If not, the lighting is defective. Contact Miele. Solution – Turn the main switch to "I". – Plug the machine in. – If the fuse has blown contact Miele's Technical Service Department. Solution – The machine goes into standby mode when not used for a programmed time.
Frequently asked questions What if the machine does not switch on, even though the "Switch on at" timer setting is activated? Possible fault The System Lock is activated. The display messages are difficult to read. Possible fault The contrast or brightness of the displays are too low / high.
Frequently asked questions Solution See "Cleaning and Care". Solution – Turn off the unit immediately. – Contact the Miele's Tech. Service if the bean container is not empty. Otherwise fill the container with fresh beans. Solution Set the grind control slide to a finer grind.
Frequently asked questions The coffee/espresso is not hot enough. Possible fault – Were the supply lines and cup pre-heated? – The temperature is set too low. – Check if the brew unit is clogged. No drink is prepared although the beans were grinded and enough water is in the container.
Instead of coffee only water is dispensed. Possible fault – The beans may have gotten stuck. – The ground coffee funnel cover was opened and closed and a preparation with ground coffee was selected but no ground coffee was inserted. The coffee system switches automatically back to bean use after preparation.
Frequently asked questions Water is in the waste unit. Possible fault This is not a fault. "Coffee water" is in the waste unit. Possible fault – If the grind setting is too coarse, this can result in too much coffee water in the waste unit.
The brew unit or waste unit could not be pulled from the machine. Possible fault – The brew unit is not in the correct position. – The door was opened during grinding or brewing. No crema has formed or it is "different". Possible fault –...
Frequently asked questions Too much crema has formed and is above the coffee dispensers. Possible fault Some coffee types produce too much crema when the coffee / espresso temperature is set to the maximum and the amount of ground coffee is too much.
The message "Check brew unit" appears on the display? Possible fault The brew unit is clogged. The message "Fault - 28" appears on the display? Possible fault If too much ground coffee passes through the coffee chute the machine is unable to process it so it can be emptied into the waste container.
The brew unit motor will automatically move to the correct position. – When the message "Fit the brew unit" appears, open the door and insert all parts into the machine. – Close the door. If the message still shows contact Miele Technical Service.
Miele’s Service department, Extended Service Contracts offered by other providers for Miele products will not be recognized by Miele. Our goal is to prevent unauthorized (and untrained) service personnel from working on your Miele products, possibly doing further damage to them, you and/or your home.
Caring for the environment Disposal of packing material The cardboard box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. Please recycle. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children.
If there is any question concerning the electrical connection of this appliance to your power supply, please consult a licensed electrician or contact Miele’s Technical Service Department. See back page for contact information. Electrical connection WARNING:...
Miele appliances can be installed flush or proud. Discuss your installation requirements with your architect, designer and installer. A combination with other Miele built in appliances is possible. If the machine is installed in combination with other appliances, it should be installed with a protective base between the appliance and the unit (exception: installation with a built-in plate warmer).
^ If there is no sealing strip around the installation recess, stick the Miele sealing strip onto the appliance from the back before putting it into the recess.
Installation ^ Push the appliance into the niche. ^ Open the door and partially tighten the screws. ^ Carefully turn the lower screws, center the machine. ^ To secure the appliance in the cabinet, tighten the upper screws, by hand. Do not use an electric screwdriver.
Alteration rights reserved / 0811 M.-Nr. 07 816 880 / 02 INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.