Service Programming Mode; Table 070-3: Customer Programming Settings - Miele CVA 4062 Technical Information

CVA 4062/CVA 4066/CVA 4068 Coffee Systems
Programming
Function
Safety
Water Hardness
Display
Volume
Showroom
Program
Factory Default

Table 070-3: Customer Programming Settings

4.2

Service Programming Mode

Initial requirements:
Switch the appliance off.
Accessing:
1. Press and hold Hot Water.
2. Press On/Off once.
3. Release Hot Water.
4. Press Hot Water again 5 times; hold on the 5th time until the programming mode
is displayed.
Note:
Access has to be completed within 10 seconds.
Option
On
Off
Soft 1 (0 - 4 grains per gallon)
Medium 2 (5 - 9 grains per gallon)
Hard 3 (10 - 18 grains per gallon)
Very Hard 4 (> 18 grains per gallon)
Contrast 1 – 7 (4)
1 – 7 (7)
Brightness
Buzzer tones 0 – 7 (4)
Keypad tones 0 – 7 (4)
Demo program
Off
All settings
User profiles
Technical Information
Description
System lock is switched on. The
machine can be safeguarded against
accidental switch-on.
System lock is switched off.
Set the water hardness. The water
hardness settings affects the
calculation for 50 servings until
descale. The harder the water, the
sooner the message appears. See
Table 070-2.
Set the contrast and brightness.
Set the buzzer and keypad volumes.
The appliance can be used but will not
heat. The message Demo mode for
dealer only or Demo mode is active
for dealer only will be displayed if
demo mode has been activated. Press
OK to confirm the message.
Demo mode is off.
All settings that can be modified in
customer programming only will be
restored to their factory settings. The
language will remain and demo mode
will stay switched on. Settings that can
be modified in either customer
programming or service mode will not
be affected.
All user profiles will be deleted.
93