Flow Meter (B3/4) Removal; Figure 051-16: Steam Pump - Miele CVA 4062 Technical Information

CVA 4062/CVA 4066/CVA 4068 Coffee Systems

Figure 051-16: Steam Pump

Warning!
In order to avoid possible water system faults (e.g., clogging or blocking of
valves), grease, oil or other slip lubricants should never be used when
assembling and installing water system parts.
4.5

Flow Meter (B3/4) Removal

1. Remove the appliance from its cabinet. See Section 010-4.1.
2. Carefully remove the top cover retaining screws. The larger (T20) screws have
metal washers underneath that can easily be misplaced.
3. Remove the top cover.
4. Remove the three service door retaining screws; see Figure 051-12, Item 1.
5. Release the wiring harness (black cable) connecting the control and power
electronics from its guide.
6. Open the service door. See Figure 051-13.
7. Remove the two bottom rear panel retaining screws.
8. Remove the bottom rear panel. The flow meter is shown in Figure 051-17, Item 1.
Technical Information
1 Pump retaining screws
2 Temperature limiter
69