Warning And Safety Instructions; General; Risk Of Burning Or Scalding - Miele CVA 4062 Technical Information

Technical Information
A

Warning and Safety Instructions

1

General

Any repairs or maintenance performed by unqualified personnel could be dangerous.
All applicable laws, codes, regulations, and accident prevention guidelines must be
observed when serving, modifying, testing or maintaining appliances. All repairs
should be performed by a trained technician in strict accordance with local, state and
national codes.
Before any service work is started, the machine must be safely disconnected from its
power source. Even with the machine switched off, voltage may exist on some
components.
After work has been completed, as a matter of standard practice, a visual as well as an
operational check should be performed.
Note:
Prior to starting service or repair work, remove all containers and the drip
tray with the spill guard grid from the appliance.
2

Risk of Burning or Scalding

Some components may be very hot, such as heaters. Also, some components may
contain pressurized steam. Use caution when working on these parts.
To protect from burns:
1. Allow the CVA to cool down for approximately one hour before starting service or
repair work, so that the heaters can cool.
2. In service mode, pump cool water through the heater for a few minutes to shorten
the cooling time. Use the component test for each pump. See Table 070-5.
CVA 4062/CVA 4066/CVA 4068 Coffee Systems
8