Powerware Ferrups FE/QFE UPS User Manual page 42

500 va–18 kva,50 and 60 hz
Table of Contents

Advertisement

Operation
When AC input voltage is present, the UPS system can provide output voltage even
though its batteries are disconnected. To confirm that there is no UPS output voltage,
always disconnect the AC input source; if the UPS has one or more separate battery
cabinets, open the DC disconnect switch on each battery cabinet or disconnect the
battery cabinet from the UPS.
1.
Equipment can be damaged if you change the switch position when line is applied and
the UPS is off or on battery! Refer to TIP 410.
2. Turn the UPS ON/OFF switch to the OFF position.
3. If the UPS is plugged in, unplug it. For hardwired models, turn
36
C A U T I O N
UPSs with no bypass switch:
Continue to Step 2.
If you need to use the equipment while the UPS is off, plug the
equipment into standard wall outlets and restart the equipment.
UPSs with a Break-Before-Make (BBM) bypass switch
on the side of the switch): Shut down the protected equipment.
Turn the bypass switch to the LINE position. Continue to
Step 2.
If you need to use the equipment while the UPS is off, restart
the equipment. The equipment receives direct AC line instead
of conditioned power from the UPS.
UPSs with a Make-Before-Break (MBB) bypass switch
on the side of the switch): Verify that the AC LINE indicator is
on, the BATTERY POWER indicator is off, and the UPS is
providing output. If all three of these conditions are present,
turn the bypass switch to the LINE position. Your equipment
receives direct AC line instead of conditioned power from the
UPS. Continue to Step 2.
If all three of these conditions are not present, follow Steps 2–4
before you turn the bypass switch to the LINE position. This
causes a break in power to your equipment between shutting
down the UPS and turning the bypass switch to the LINE
position.
C A U T I O N
the AC line disconnect switch to the OFF position.
Powerware
®
FERRUPS FE/QFE UPS (500 VA–18 kVA) User's Guide
Turn off the protected equipment.
(see the label
(see the label
Rev A www.powerware.com

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ferrups feFerrups qfe

Table of Contents