Environmental Protection Measures; Precautions On Disassembly And Assembly Of Engine - Baudoulin 4M11G Maintenance Manual

Maintenance Manual of 4M11 Series Diesel Engine For Land Power Generators
naturally secreted grease to help moisturize the skin.
(9) Do not clean the skin by gasoline, kerosene, fuel, thinner, or solvent.
(10) Upon detection of skin irritation, please immediately seek for medical treatment.
(11) If possible, deoil the parts before the handling of parts.
(12) Please use goggles or face mask whenever your eyes are endangered. Make sure to
prepare the eye flushing fluid at all accessible places.
(13) During the repair of engine, never splash oil or other liquid onto the ground. In event of
accidental leakage of hydrocarbon or other liquid, take all necessary measures to
quarantine this area to keep clean the environment and guard personnel against injuries.
(14) The handling, storage, and recovery of hydrocarbon, ethylene, glycol, and petroleum
must abide by the safety and environmental standards of the country in which the
operations are fulfilled.

4.1.5 Environmental Protection Measures

Please observe relevant environmental protection laws and regulations with respect to
disposal of waste oil and hydrocarbons. For details, consult local officials.

4.1.6 Precautions on Disassembly and Assembly of Engine

Most accidents in connection with use, maintenance and service of engine are resulted
from failure to observe safety rules and basic precautions. So, you should know risks you face
and take corresponding preventive measures to avoid occurrence of accidents. Operation,
maintenance, and repair of the engine shall be performed by personnel who have received
required trainings and have proper skills using proper tools.
Failure to follow relevant instructions given in this manual may result in serious accidents,
even endangering the operator's life. Weichai Power Co., Ltd. cannot foresee all potential risks.
Similarly, guidelines and instructions specified in this manual are not exhaustive.
Before proceeding with maintenance or repairing, a signboard containing "Don't Use" or a
similar sign should be placed on the starter switch.
Before use of the barring rod, necessary preventive measures should be taken.
(1) Ensure that the maintenance site and surrounding environment are suitable for safe
operation.
(2) Ensure the maintenance workshop or area around the engine is clean and neat.
(3) Before work, remove ring, necklace and watch, and wear well-fitted working clothes.
(4) Before working, please check whether corresponding protection equipment (goggles,
gloves, shoes, masks, working uniform, helmet, etc.) are within effective life.
(5) Do not use faulty or unsuitable tools.
32