Routine Maintenance - Baudoulin 4M11G Maintenance Manual

Maintenance Manual of 4M11 Series Diesel Engine For Land Power Generators
Preventing
Loctite 271
fixing
For
Loctite 277
element and bore
Loctite 270 Sealing cylinder head top
Loctite 518 It's applied onto shining
(modified from metal surfaces for sealing
Loctite 510) purpose.
Loctite
KB5910

2.2 Routine Maintenance

 Check the coolant level and temperature.
Observe the coolant level through glass sight hole. If the coolant is insufficient, open the
filler port cap and add coolant.
Note: While opening the filler port cap, make sure to push down the air bleeding button,
in order to prevent the coolant from causing personal injuries under hot state of engine.
looseness,
Cup plug, oil drain hole
sealing between
Other cup plug
Push rod -cylinder head
Plates connecting engine body
front end face to front end cover,
and connecting engine body rear
end face to flywheel cover
Interface between water pump rear
cover and engine body front end
face
Interface between flywheel cover
and its connecting plate
Interface between cylinder block
and engine oil cooler cover
Interface between cylinder block
and engine oil filler cap cover
Junction surface between oil sump
and engine block
12