Repair Sensor
Housing
April 2017
9.4.12
Install Sample Block Heater Rods
1.
2.
3.
Figure 9-23 O
Cell, Thermocouple, and Heater Connections
2
21
2
Before installing sample block heater rods (13,
rods with Watlube heater release agent.
Install the heater rods (13), heater clamps (12), and screws (11).
Reconnect the heater rod leads at the sensor housing terminal blocks,
Instruction Manual
Figure
9-22), evenly coat the heater
(Figure
Install Sample Block Heater
Rods
IM-106-880C, OI
9-23).