10/2013
1013688-00
When assembling the device please note:
–
Insert and tighten the screws
5.11
Cleaning or replacing UV lamps and
filter panels in the canopy
–
Removing the canopy panel: see page 40.
The following components listed in the maintenance plan are fitted in the
canopy:
1.80 m UV low pressure lamps
Facial tanner UV low pressure lamps and the associated starters
Facial tanner UV high pressure lamps
Facial tanner filter panels
–
Remove the screws and then remove the lamp cover.
PRESTIGE 1000:
The facial tanner's UV low pressure lamps must be removed first so that the
UV high pressure lamps can be changed.
–
Remove the lamps.
Cleaning and maintenance
Operating instructions – 47/74