ergoline PRESTIGE 1000 INTELLIGENT PERFORMANCE Operating Instructions Manual page 129

10/2013 1013688-00
– Open the clamps.
– Lift the filter panel, pull it out of the guide and remove it.
– Unplug the UV lamps.
– Clean the reflector.
– Only utilize original UV lamps.
– Only touch new lamps in the handling zone.
– Test the function of the safety switch.
The safety switch ensures that the device switches off in the event of a
faulty filter panel.
– Press the switch.
If the switch springs back automatically then it is functional.
– Replace the filter panel.
Cleaning and maintenance
Operating instructions – 45/74