10/2013
1013688-00
–
Remove one screw from each one.
–
Remove both housings and carefully lay them aside.
Changing the UV high pressure lamps: see page 44.
WARNING!
Danger of overheating will exist if the wrong
UV high pressure lamps are used!
The danger of overheating will exist if the wrong UV high
pressure lamps are fitted in the shoulder tanner. The device
might be damaged.
–
Only Ergoline ULTRA UV high pressure lamps
(1500384-..) are to be fitted in the shoulder tanner.
Each of the high pressure lamps in the shoulder tanner is fitted with 2 different
filter panels. The two filter panels are secured in place inside the housing.
–
Remove the screws.
–
Use the suction cup to lift the upper filter panel.
–
Pull out the holder.
Cleaning and maintenance
Operating instructions – 49/74