Cleaning Or Replacing Lamps In The Canopy - ergoline BALANCE 700 HYBRID PERFORMANCE Operating Instructions Manual

12/2014 1015739-00
4.10 Cleaning or replacing lamps in the
canopy
– Removing the canopy panel: see page 49.
The following components listed in the maintenance plan are fitted in the
canopy:
UV low pressure lamps 2.00 m

Beauty Light lamps 2.00 m

– Please maintain the correct order of the Beauty Light lamps and UV low
pressure lamps.
a1: UV low pressure lamps
a2: Beauty Light lamps
Replacing lamps: see page 53.
The assembly is the same process in reverse order.
When assembling the device please note:
– Support the canopy panel with one hand so that it does not fall down.
– Re-lock the locks: first the lock in the middle, then the outer locks.
Cleaning and maintenance
Operating instructions – 55/70