Replacing The Aqua System Canister - ergoline PRESTIGE 1000 INTELLIGENT PERFORMANCE Operating Instructions Manual

10/2013 1013688-00
5.16.2

Replacing the AQUA SYSTEM canister

– Opening the bed base: see page 41.
– Remove the canister.
– Unscrew the lid on the new canister.
– Remove the lid with the hose from the old canister.
– Screw the lid with the hose onto the new canister.
– Push the hose well down so that it touches the bottom of the canister.
– Put the canister back in the device.
– Close the bed base. You should hear the bed base click into place.
Venting
NOTE:
To ventilate, access to the Professional Setup Manager in
the Control Center is required.
– Go to the Professional Setup Manager.
– Activate the fill mode in the AQUA FRESH AROMA menu.
Cleaning and maintenance
Operating instructions – 57/74