Nj101 - Omron NX701-17 Series Troubleshooting Manual

Related Manuals
Manual name Cat. No.
NJ/NX-series CPU Unit W507
Motion Control User's
Manual
NJ/NX-series Motion W508
Control Instructions Ref-
erence Manual
NJ/NX-series CPU Unit W505
Built-in EtherCAT® Port
User's Manual
NJ/NX-series CPU Unit W506
TM
Built-in EtherNet/IP
Port User's Manual
NJ-series W588
CPU Unit OPC UA
User's Manual
NJ/NX-series Database W527
Connection CPU Units
User's Manual
NJ-series SECS/GEM W528
CPU Units User's Man-
ual
NJ-series NJ Robotics W539
CPU Unit User's Manual
NJ/NY-series NC Inte- O030
grated Controller User's
Manual
NJ/NY-series O031
G code Instructions Ref-
erence Manual
NJ/NX-series Trouble- W503
shooting Manual
Sysmac Studio Version 1 W504
Operation Manual
CNC Operator O032
Operation Manual
NX-series EtherCAT® W519
Coupler Unit User's Man-
ual
NX-series Data W525
Reference Manual
22
Model numbers Application
NX701- Learning about motion con-
NX1P2- trol settings and program-
NJ501- ming concepts.
NJ301-
NJ101-
NX701- Learning about the specifi-
NX1P2- cations of the motion control
NJ501- instructions that are pro-
NJ301- vided by OMRON.
NJ101-
NX701- Using the built-in EtherCAT
NX1P2- port on an NJ/NX-series
NJ501- CPU Unit.
NJ301-
NJ101-
NX701- Using the built-in Ether-
NX1P2- Net/IP port on an NJ/NX-
NJ501- series CPU Unit.
NJ301-
NJ101-
NJ501-100 Using the OPC UA.
NX701-20 Using the database connec-
NJ501-20 tion service with NJ/NX-
NJ101-20 series Controllers
NJ501-1340 Using the GEM Services
with NJ-series Controllers
NJ501-4 Controlling robots with NJ-
series CPU Units.
NJ501-5300 Performing numerical con-
trol with NJ/NY-series Con-
NY532-5400
trollers.
NJ501-5300 Learning about the specifi-
cations of the G code/M
NY532-5400
code instructions.
NX701- Learning about the errors
NX1P2- that may be detected in an
NJ501- NJ/NX-series Controller.
NJ301-
NJ101-
SYSMAC- Learning about the operat-
SE2 ing procedures and func-
tions of the Sysmac Studio.
SYSMAC Learning an introduction of
-RTNC0D the CNC Operator and how
to use it.
NX-ECC Leaning how to use an NX-
series EtherCAT Coupler
Unit and EtherCAT Slave
Terminals
NX- Referencing lists of the data
that is required to configure
systems with NX-series
Units.
Description
The settings and operation of the CPU Unit and
programming concepts for motion control are
described.
The motion control instructions are described.
Information on the built-in EtherCAT port is pro-
vided. This manual provides an introduction and
provides information on the configuration, features,
and setup.
Information on the built-in EtherNet/IP port is pro-
vided. Information is provided on the basic setup,
tag data links, and other features.
Information on the OPC UA is provided.
Describes the database connection service.
Information is provided on the GEM Services.
Describes the functionality to control robots.
Describes the functionality to perform the numeri-
cal control.
The G code/M code instructions are described.
Concepts on managing errors that may be
detected in an NJ/NX-series Controller and infor-
mation on individual errors are described.
Describes the operating procedures of the Sysmac
Studio.
An introduction of the CNC Operator, installation
procedures, basic operations, connection opera-
tions, and operating procedures for main functions
are described.
The system and configuration of EtherCAT Slave
Terminals, which consist of an NX-series EtherCAT
Coupler Unit and NX Units, are described along
with the hardware, setup, and functions of the Eth-
erCAT Coupler Unit that are required to configure,
control, and monitor NX Units through EtherCAT.
Lists of the power consumptions, weights, and
other NX Unit data that is required to configure
systems with NX-series Units are provided.
NJ/NX-series Troubleshooting Manual (W503)