Draytek Vigor3900 User Manual page 422

VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: (0)330 088 0195 Fax: +44 (0)1245 808299
4 . 1 4 . 1 . 2 A p p l y S e t t i n
4 . 1 4 . 1 . 2 A p p l y S e t t i n
This feature is able to apply TR-069 settings (including STUN and ACS server settings) to
all of APs managed by Vigor3900 at the same time.
Item
Apply Settings to APs
AP Password
Apply Specific STUN
Settings to APs
Server Address
Server Port
Minimum Keep Alive
Period
Maximum Keep Alive
Period
Apply
Cancel
g s t o V i g o r A P
g s t o V i g o r A P
Description
Check this box to make the settings in this page apply to
VigorAP.
Type the password of the VigorAP that you want to apply
Vigor3900's TR-069 settings.
After clicking the Enable radio button for Apply Settings to
APs, if you want to apply specific STUN settings (not the
STUN Settings configured for Vigor3900) to VigorAPs to
meet specific requirements, simply check this box. Then,
type the server IP address, server port, minimum keep alive
period and maximum keep alive period respectively.
Type the IP address of the STUN server.
Type the port number of the STUN server.
If STUN is enabled, the CPE must send binding request to
the server for the purpose of maintaining the binding in the
Gateway. Please type a number as the minimum period. The
default setting is "60 seconds".
If STUN is enabled, the CPE must send binding request to
the server for the purpose of maintaining the binding in the
Gateway. Please type a number as the maximum period. A
value of "-1" indicates that no maximum period is specified.
Click it to save the configuration.
Click it to discard the settings configured in this page.
414 Vigor3900 Series User's Guide