Draytek Vigor3900 User Manual page 158

VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: (0)330 088 0195 Fax: +44 (0)1245 808299
WAN / LAN Profile
Metric
H o w t o a d d a n e w I P
H o w t o a d d a n e w I P
1. Open Routing>>Static Route and click the IPv6 Static Route tab.
2. Click the Add button.
3. The following dialog will appear.
Available parameters are listed as follows:
Item
Profile Name
Enable
Destination IP
Address
Prefix Length
Nexthop
WAN/LAN Profile
Metric
Apply
Cancel
4. Enter all of the settings and click Apply. The new profile will be added on the screen.
Display the subnet LAN or WAN profile of the gateway.
Display the distance to the target.
v 6 S t a t i c R o u t e p r o f
v 6 S t a t i c R o u t e p r o f
Description
Type the name of the static route profile.
Check this box to enable such profile.
Type the IP address for such static route profile.
Type the prefix length for such profile.
Type the nexthop address for such static route profile.
Choose one of the LAN/WAN profiles of the gateway for
such static route.
Type the distance to the target (usually counted in hops).
Click it to save and exit the dialog.
Click it to exit the dialog without saving anything.
150
i l e
i l e
Vigor3900 Series User's Guide