GE C60 Instruction Manual page 98

ADD DEVICE TO SOFTWARE
If using a blue or grey Ethernet cable, skip the rest of the this section. If using an orange cross-over Ethernet cable, the
computer needs to be set up as follows.
1. Use an orange Ethernet cross-over cable to connect the computer to the rear Ethernet port. In case you need it, the
following figure shows the pinout for an Ethernet cross-over cable.
3
Next, assign the computer an IP address compatible with the relay's IP address.
1. From the Windows desktop, right-click the My Network Places icon and select Properties to open the network
connections window. Or in Windows 7, access the Network and Sharing Center in the Control Panel.
3-52
Figure 3-59: Ethernet cross-over cable PIN layout
CHAPTER 3: INSTALLATION
C60 BREAKER PROTECTION SYSTEM – INSTRUCTION MANUAL