GE C60 Instruction Manual page 102

ADD DEVICE TO SOFTWARE
3. Click the Quick Connect button to open the window.
3
4. Select the Ethernet interface and enter the IP address assigned to the C60, then click the Connect button. The
EnerVista UR Setup software creates a site named "Quick Connect" with a corresponding device also named "Quick
Connect" and displays them on the left side of the screen.
5. Expand the sections to view data directly from the C60 device.
Each time that the EnerVista UR Setup software is initialized, click the Quick Connect button to establish direct
communications to the C60. This ensures that configuration of the EnerVista UR Setup software matches the C60 model
number.
When direct communications with the C60 via Ethernet is complete, make the following changes:
1. From the Windows desktop, right-click the My Network Places icon and select Properties to open the network
connections window.
2. Right-click the Local Area Connection icon and select the Properties item.
3. Select the Internet Protocol (TCP/IP) item from the list provided and click the Properties button.
4. Set the computer to "Obtain a relay address automatically" as shown.
3-56
CHAPTER 3: INSTALLATION
C60 BREAKER PROTECTION SYSTEM – INSTRUCTION MANUAL