Maintenance; Monitoring; Devices With Site Targets; Data With Modbus Analyzer - GE C60 Instruction Manual

C60 Breaker Protection System
Chapter 9: Maintenance

Maintenance

This chapter outlines monitoring, maintenance, repair, storage, and disposal of the hardware and software.

9.1 Monitoring

Devices and data can be monitored.

9.1.1 Devices with Site Targets

To view an overview of devices:
1. Access the Site Targets item in the Online Window area, below the list of devices. It can take a few minutes for all
devices to be read.
2. Acknowledge any messages for unaccessible devices. The Site Targets window opens when done.

9.1.2 Data with Modbus Analyzer

Use the Modbus Analyzer under Maintenance > Modbus Analyzer to monitor the values of the UR device. Use the Modbus
memory map addresses outlined in the UR Family Communications Guide for the entries.
The upper part of the window displays values. The lower part of the window is for factory service use.
C60 BREAKER PROTECTION SYSTEM – INSTRUCTION MANUAL
Figure 9-1: Site Targets window
9-1