Part-Setting The System (Home); Unsetting The System - Menvier Security TSD402 User Manual

TSD402 User Manual

Part-Setting the System (HOME)

The system may have been programmed to allow you to have part of the system `set' while other
areas are `off'. Before attempting to part-set the system, the risk of false alarms can be reduced by
ensuring that all detectors are unobstructed and any doors, windows etc. are properly secured.
* During the part-set exit the internal sounder is switched off.

Unsetting the System

If the entry time is exceeded an alarm is generated from the internal sounders and the count down
entry timer is re-started. If at the end of the second count down the system has not been unset a full
alarm condition will occur (internal / external sounders and speech dialler activation).
Part-Set (HOME)
UNSET
Enter first two digits of passcode
[
then (e.g.,
SECONDS LEFT 030
The display shows the remaining
time *
SET
When the two-tone sound is heard,
the system is Part-Set
Unsetting
Enter via the prescribed entry
route. The entry tone will start and
the display shows the remaining
time.
ENTER CODE 025
Enter your passcode
5 6 7 8
(e.g.,
UNSET
System is now Unset.
Operating the System
5 6 [
)
)
5