Walk Test - Menvier Security TSD402 User Manual

TSD402 User Manual
Walk Test (key
The Walk Test option allows user 1 to test the function of all detection zones without causing an
alarm. As each zone is activated the zone number is displayed and the internal sounders generate
a two-tone sound. When the zone is deactivated the sounder will stop, but the display will latch the
activated zone.
2 )
Enter first 3 digits of Passcode then
(e.g.,
USER OPTION -
Press
Activate each zone in turn.
CF- 1 2 3 4 5 F T
As each zone is activated the
internal sounder generates a
two-tone sound and the display
latches the activated zone
Press

Walk Test

UNSET
5 6 7 [
)
2
for Walk Test
NONE
]
to abandon test.
UNSET
User Options
[
No Zones Active
All zones activated
CF = Circuit Fault
1 = Zone 1 Activated
2 = Zone 2 Activated
3 = Zone 3 Activated
4 = Zone 4 Activated
5 = Zone 5 Activated
F = Final Exit Activated
T = Tamper Zone Activated
11