Configure Part Sets; View System Log; A B C - Menvier Security TS690 Installation & Programming Manual

Engineer's Menu 2

Configure Part Sets

The TS690 and TS690ID can be configured to have
up to three parts set modes (Part Set A, Part Set B
and Part Set C). This option allows the engineer to
configure each part set mode. Within each part
set mode you must designate which circuits will
remain armed and which circuits will be omitted.
When the user selects the relevant part set mode
the system only arm the circuits that are
designated as armed and isolate the circuits that
are designated as omitted.
Only the circuit types "Night", "Final Exit" and "Exit
terminator" can be designated as omitted.
LCD
Engineers menu 2
Select Option :-
Configure Omits
for part set A
Select part set mode:.
A
= Part set A
B = Part set B
C
= Part set C
Front Door
CCT 01 Armed
A
= Next circuit
B
= Alternate Armed/Omitted
C
= Previous circuit
e.g. Press B
Circuit text
Front door
CCT 01 Omitted
Status
Configure Omits Flowchart
42
Starburst
ENGR 2 -
8
PSET A
ENT
CCT 01-A
CCT 01-O
ENT
[2.8]

View System Log

The engineer can use this option to view the
system log. The [A] and [C] keys allow you to scroll
backwards and forwards through the log events.
Event type
Date/Time
LED
Event type
E2 -
Date/Time
PS A
01-A
01-O
TS690 & TS690ID Installation Manual
Engineers menu 2
Select Option :-
9
PASSCODE 01
08:40.59 28/04
A
= Scroll backwards
C
= Scroll forwards
ALARM 02
08:45.59 28/04
A
= Scroll backwards
C
= Scroll forwards
ESC
View System Log Flowchart
[2.9]
B
to alternate
Name &
User No.
B
to alternate
Circuit No. &
Circuit Text